đźšš Free Worldwide Shipping on All Orders!Shop Now
1 / 16
Gibson Les Paul (SG) Standard Cherry 1961
The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.
Summary
Finish: Original finish
Body Material: Mahogany
Neck Material: Mahogany
Neck Profile: "C" profile
Neck Thickness (IN): 1st- 0.80" 12th- 0.85"
Fingerboard Radius: 10.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Electronics: Original PAF humbuckers with dual volume and tone controls and three-way toggle. The two volume pots have been replaced. The tone pots are original and date to 1960.
Pickup Measurements: Neck- 7.61k Bridge- 7.66k
Hardware: The tuners, nut, tailpiece and tailpiece studs are not original. This was originally a Vibrola guitar and the stop tail piece was installed later.
Weight: 6 lbs 6 oz
Cosmetic Condition: The guitar is in good cosmetic condition with signs of aging and play wear throughout. There are holes at the bottom of the guitar where a Vibrola used to be, and additional screw holes where a Bigsby was installed. There is moderate corrosion on the bridge, pickup covers, and tuners. The pickguard has shrunk slightly and is beginning to lift at the corners. The neck pickup ring is cracked in one corner but still functional. There is some belt buckle rash on the back, and some denting of the back edge near the electronics cavity. There are footprints on the front and back of the headstock where previous tuners were installed, and additional screw holes visible on the back.
Modifications/Repairs: The output jack and volume pots have been replaced. The nut is not original. The original Vibrola was removed at some point and replaced with a Bigsby. The Bigsby has since been removed and the guitar was converted to a stop tail. The ground wire was rerouted to go from the treble side tailpiece stud to the control cavity. The hole running the ground wire is visible next to the back control cavity cover. There is a repaired crack in the wood around the output jack. This area has been reinforced and is stable. The headstock wings have slightly separated and been reglued.
Serial Number: 012113
Tech Notes: The guitar plays well with low action. The frets are wide with moderate play wear.
Case Details: Original Hardshell Case
Summary
Finish: Original finish
Body Material: Mahogany
Neck Material: Mahogany
Neck Profile: "C" profile
Neck Thickness (IN): 1st- 0.80" 12th- 0.85"
Fingerboard Radius: 10.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Electronics: Original PAF humbuckers with dual volume and tone controls and three-way toggle. The two volume pots have been replaced. The tone pots are original and date to 1960.
Pickup Measurements: Neck- 7.61k Bridge- 7.66k
Hardware: The tuners, nut, tailpiece and tailpiece studs are not original. This was originally a Vibrola guitar and the stop tail piece was installed later.
Weight: 6 lbs 6 oz
Cosmetic Condition: The guitar is in good cosmetic condition with signs of aging and play wear throughout. There are holes at the bottom of the guitar where a Vibrola used to be, and additional screw holes where a Bigsby was installed. There is moderate corrosion on the bridge, pickup covers, and tuners. The pickguard has shrunk slightly and is beginning to lift at the corners. The neck pickup ring is cracked in one corner but still functional. There is some belt buckle rash on the back, and some denting of the back edge near the electronics cavity. There are footprints on the front and back of the headstock where previous tuners were installed, and additional screw holes visible on the back.
Modifications/Repairs: The output jack and volume pots have been replaced. The nut is not original. The original Vibrola was removed at some point and replaced with a Bigsby. The Bigsby has since been removed and the guitar was converted to a stop tail. The ground wire was rerouted to go from the treble side tailpiece stud to the control cavity. The hole running the ground wire is visible next to the back control cavity cover. There is a repaired crack in the wood around the output jack. This area has been reinforced and is stable. The headstock wings have slightly separated and been reglued.
Serial Number: 012113
Tech Notes: The guitar plays well with low action. The frets are wide with moderate play wear.
Case Details: Original Hardshell Case
$6,982.50
Original: $19,950.00
-65%Gibson Les Paul (SG) Standard Cherry 1961—
$19,950.00
$6,982.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.
Summary
Finish: Original finish
Body Material: Mahogany
Neck Material: Mahogany
Neck Profile: "C" profile
Neck Thickness (IN): 1st- 0.80" 12th- 0.85"
Fingerboard Radius: 10.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Electronics: Original PAF humbuckers with dual volume and tone controls and three-way toggle. The two volume pots have been replaced. The tone pots are original and date to 1960.
Pickup Measurements: Neck- 7.61k Bridge- 7.66k
Hardware: The tuners, nut, tailpiece and tailpiece studs are not original. This was originally a Vibrola guitar and the stop tail piece was installed later.
Weight: 6 lbs 6 oz
Cosmetic Condition: The guitar is in good cosmetic condition with signs of aging and play wear throughout. There are holes at the bottom of the guitar where a Vibrola used to be, and additional screw holes where a Bigsby was installed. There is moderate corrosion on the bridge, pickup covers, and tuners. The pickguard has shrunk slightly and is beginning to lift at the corners. The neck pickup ring is cracked in one corner but still functional. There is some belt buckle rash on the back, and some denting of the back edge near the electronics cavity. There are footprints on the front and back of the headstock where previous tuners were installed, and additional screw holes visible on the back.
Modifications/Repairs: The output jack and volume pots have been replaced. The nut is not original. The original Vibrola was removed at some point and replaced with a Bigsby. The Bigsby has since been removed and the guitar was converted to a stop tail. The ground wire was rerouted to go from the treble side tailpiece stud to the control cavity. The hole running the ground wire is visible next to the back control cavity cover. There is a repaired crack in the wood around the output jack. This area has been reinforced and is stable. The headstock wings have slightly separated and been reglued.
Serial Number: 012113
Tech Notes: The guitar plays well with low action. The frets are wide with moderate play wear.
Case Details: Original Hardshell Case
Summary
Finish: Original finish
Body Material: Mahogany
Neck Material: Mahogany
Neck Profile: "C" profile
Neck Thickness (IN): 1st- 0.80" 12th- 0.85"
Fingerboard Radius: 10.00"
Nut Width: 1-11/16"
Scale Length: 24 3/4"
Electronics: Original PAF humbuckers with dual volume and tone controls and three-way toggle. The two volume pots have been replaced. The tone pots are original and date to 1960.
Pickup Measurements: Neck- 7.61k Bridge- 7.66k
Hardware: The tuners, nut, tailpiece and tailpiece studs are not original. This was originally a Vibrola guitar and the stop tail piece was installed later.
Weight: 6 lbs 6 oz
Cosmetic Condition: The guitar is in good cosmetic condition with signs of aging and play wear throughout. There are holes at the bottom of the guitar where a Vibrola used to be, and additional screw holes where a Bigsby was installed. There is moderate corrosion on the bridge, pickup covers, and tuners. The pickguard has shrunk slightly and is beginning to lift at the corners. The neck pickup ring is cracked in one corner but still functional. There is some belt buckle rash on the back, and some denting of the back edge near the electronics cavity. There are footprints on the front and back of the headstock where previous tuners were installed, and additional screw holes visible on the back.
Modifications/Repairs: The output jack and volume pots have been replaced. The nut is not original. The original Vibrola was removed at some point and replaced with a Bigsby. The Bigsby has since been removed and the guitar was converted to a stop tail. The ground wire was rerouted to go from the treble side tailpiece stud to the control cavity. The hole running the ground wire is visible next to the back control cavity cover. There is a repaired crack in the wood around the output jack. This area has been reinforced and is stable. The headstock wings have slightly separated and been reglued.
Serial Number: 012113
Tech Notes: The guitar plays well with low action. The frets are wide with moderate play wear.
Case Details: Original Hardshell Case
